SINUMERIK HAND-HELD UNIT 6FX2007-1AE14 6FX20071AE14 6FX2OO7-1AE14 6FX2 007-1AE14

Siemens 6FX2007-1AE14 SINUMERIK Handheld Unit

Overview

The 6FX2007-1AE14 is a SINUMERIK handheld unit used with FM-NC, 840D, and 810D control environments. Product data identifies it as a handheld unit with a 10 m B-MPI cable, 2 emergency-stop channels, 2 permissive switch channels, and 3 steps with 4-core connection.

Published data also lists max. 6 W power consumption, 250 mA current consumption, and environmental ratings that place it clearly in machine-side operator hardware rather than general cabinet electronics.

In practical use, a handheld unit like this is valuable because it brings localized machine interaction closer to the motion area. On many CNC and machine-tool systems, that means easier manual movement, better proximity to the work zone, and safer service or setup workflows when compared with doing every action from the fixed operator station.

That is why a unit like 6FX2007-1AE14 is usually chosen as a system-specific accessory, not as a generic pendant replacement.

This is an engineering inference based on the product’s published handheld role, safety-channel content, and SINUMERIK application context.

Technical Data

Application Value

The 6FX2007-1AE14 is best suited to SINUMERIK-controlled machine tools and CNC systems where operators or technicians need mobile access for setup, jogging, and maintenance-related intervention close to the machine.

The inclusion of emergency-stop channels and permissive switch channels reinforces its role in operator-near machine handling rather than purely passive display use.

This application view follows directly from the published product description.

Its cable length and environmental data also make it practical in real machine service. Product sheets list a 10 m cable, 0 to 45°C operating temperature, -20 to +60°C storage temperature, 5 to 80% operating humidity at 25°C, and 2 kHz max scanning frequency.

Those values are especially relevant when the pendant is used in machine halls where the operator hardware must stay dependable during repeated use around the work envelope.

Replacement and Selection Perspective

For replacement work, this model should be matched by control family, cable type, operator-safety channel layout, and machine-side interface expectations, not just by the appearance of the handheld body.

In practical CNC service, the pendant is part of the operating concept, so its wiring, safety functions, and connection structure need to line up with the installed SINUMERIK environment.

This recommendation is grounded in the product’s published FM-NC / 840D / 810D compatibility and channel configuration.

FAQ

Q1: What kind of device is 6FX2007-1AE14?
It is a SINUMERIK handheld unit used for localized machine interaction on CNC systems, not just a general HMI screen or keypad.

Its published configuration includes safety and permissive channels, which places it firmly in the machine-side operator hardware category.

Q2: What applications fit it best?
It fits SINUMERIK-controlled CNC machines where setup, jogging, or maintenance work benefits from an operator-held unit near the machine rather than relying only on a fixed panel.

This is an engineering inference based on the device’s handheld role and published control-family compatibility.

Q3: Why do the emergency-stop and permissive channels matter?
Because they show that the unit is part of the machine interaction and safety workflow, not merely a display accessory.

In practical use, those channels help support controlled operator intervention during setup and service tasks. 

This is an engineering inference based on the product’s published channel description.

Q4: Why is exact model matching important on a handheld unit?
Because cable type, interface structure, and the machine’s operator concept all affect whether the unit will function correctly after installation.

Even visually similar pendants may not preserve the same safety and control-channel behavior. 

This is an engineering inference grounded in the model’s specific channel and cable configuration.

Q5: What should be checked before ordering?
Check the installed part number, control family, cable length, required safety/permissive channel layout, and the machine’s existing handheld connection arrangement.

Those checks usually matter more than appearance alone on CNC pendants.