Used Fanuc Pc Board A16B-2202-0431 A16B22020431 A16B-22O2-O431

FANUC A16B-2202-0431 Spindle Drive PCB

Overview

The A16B-2202-0431 is a FANUC PCB in the A16B-2202 board family. Public industrial listings identify it specifically as a PC board for 6078 spindle drive, which places it in the spindle-control side of the installed hardware rather than in the CPU, memory, or general I/O category. That published description gives this board a very clear product role inside compatible FANUC drive systems.

In practical service work, spindle-drive boards are not treated as generic circuit boards.

They are matched by exact board family and exact drive position because the installed spindle section depends on the original hardware structure.

Keeping the same board model helps preserve the existing drive-side arrangement and the original board role inside the control.

Technical Data

Application Value

This board is suited to FANUC spindle-drive hardware where the installed machine already uses the 6078 spindle-drive board arrangement.

It is especially relevant in repair, refurbishment, and board replacement where the original drive section must stay aligned with the same PCB family and function.

Because the board is publicly identified by spindle-drive function, it belongs in the machine’s drive section rather than in a general control expansion area.

That makes exact model matching especially important for reliable replacement planning.

Selection Notes

The key checks are the exact part number, the A16B-2202 family, and the published description PC board for 6078 spindle drive.

These are the main compatibility points when the installed system already depends on this board role.

FAQ

Q1: What kind of board is A16B-2202-0431?
It is a FANUC spindle-drive PCB. Public parts sources describe it directly as a PC board for 6078 spindle drive, which means it belongs to the drive side of the machine rather than to the CPU or operator interface section.

That exact wording is the most important identifier for this model.

Q2: Why is the 6078 spindle-drive reference important?
Because it identifies the hardware role of the board. When a board is described by a specific spindle-drive function, that description becomes a key match point in replacement work.

It helps distinguish the board from other FANUC PCBs that may share a similar family code but serve different control functions.

Q3: Is this a main CPU board or a spindle board?
The public descriptions identify it as a spindle board. The available listings do not place it in the main CPU class.

Instead, they tie it directly to the spindle-drive section, which is a different hardware role inside the machine.

Q4: Why does exact part-number matching matter for this board?
Because spindle-drive boards are selected by exact installed function. A spindle-control PCB is not interchangeable with a generic control board simply because the connector layout looks similar.

Matching A16B-2202-0431 preserves the installed board role and helps maintain the original hardware structure of the drive section.

Q5: What should be checked before ordering?
Check the installed part number, confirm the machine requires A16B-2202-0431, and verify that the original board in the drive section is identified as the 6078 spindle-drive PCB.

Those are the core compatibility points for this model.