|
| Place of Origin | JAPAN |
| Brand Name | FANUC |
| Certification | CE ROHS |
| Model Number | A20B-8200-0845 |
The A20B-8200-0845 is a main PCB in the A20B-8200 family. It is listed as 0i-D MAIN PCB A1, and seller inventories also classify it as a motherboard, which places it in the core control-board position of the CNC rather than in the display, I/O, or communication-board layer.
From a maintenance standpoint, this is the type of board that defines the control platform already installed in the machine.
Because it sits at the center of the CNC hardware structure, replacement work should focus on exact model continuity rather than general series similarity.
Listings for this model also note core-exchange handling in some channels, which is typical for high-value main boards in established control systems.
| Parameter | Value |
|---|---|
| Part Number | A20B-8200-0845 |
| Manufacturer | FANUC |
| Product Type | Main PCB / Motherboard |
| Product Series | A20B-8200 |
| Board Role | 0i-D Main PCB A1 |
| Control Context | 0i-D CNC platform |
| Service Note Seen in Listings | Core exchange may be required |
This board is suitable for installed FANUC 0i-D CNC systems where the machine already uses the A20B-8200-0845 main-board position.
It is especially relevant in controller repair, main-board replacement, and refurbishment where the original control platform and internal hardware layout must remain unchanged.
Before ordering, confirm the installed board code directly on the hardware and verify that the control platform is 0i-D with the A1 main-board version.
On a core control board, exact part-number continuity matters because the board governs the platform identity and internal board-family structure of the CNC.
If the supplier uses a core-exchange process, that should be confirmed before purchase.
Q1: What kind of board is A20B-8200-0845?
It is a 0i-D Main PCB A1, which means it serves as a core control board inside the CNC. Seller listings also describe it as a motherboard, reinforcing that it belongs to the central control layer rather than to a peripheral board position.
Q2: Why is the “A1” designation important?
The A1 designation helps distinguish this board from other 0i-D main-board variants in the same broader family.
In service work, these suffix-level differences matter because the installed board version should remain aligned with the control hardware already in the machine.
Q3: Is this board used for display or communication tasks?
No. The board is consistently positioned as a main PCB, which means its role is broader and more central than a display card or fieldbus communication board.
It belongs to the core control hardware of the CNC.
Q4: Why does exact model matching matter so much here?
Because a main board determines the controller platform, installed hardware structure, and board-family compatibility of the machine.
Even when boards in the same series look related, replacing a core board should follow the exact installed code to avoid mismatch at the control level.
Q5: What should be checked before buying?
Check the installed board label, confirm the control is 0i-D, verify that the board is A20B-8200-0845, and confirm whether the supplier requires a core exchange.
Those are the main checks that support a correct replacement decision.
Contact Us at Any Time
