LOGO! USB PC Cable For Program Transmit 6ED1057-1AA01-0BA0 6ED10571AA010BA0 6ED1O57-1AAO1-OBAO 6ED1 057-1AA01-0BA0

6ED1057-1AA01-0BA0 | Siemens LOGO! USB PC Cable — 2m / Program Transfer / PC to LOGO! / Driver Included

Direct PC-to-LOGO! Programming Connection

The 6ED1057-1AA01-0BA0 is Siemens' official USB PC cable for the LOGO! logic module series — the dedicated connection cable between a standard PC or laptop USB port and the LOGO! controller's programming interface. It enables bidirectional transfer of LOGO! programmes: uploading from the controller to the PC for backup or modification, and downloading from the PC to the controller after programming.

Siemens LOGO! controllers are compact, low-cost logic modules used extensively in simple automation tasks where a full PLC would be disproportionate. The 6ED1057-1AA01-0BA0 provides the programming connectivity needed to commission, configure, update, and maintain LOGO! installations from a standard PC running Siemens' LOGO!Soft Comfort programming software.

Key Specifications

Compatible LOGO! Controllers

The 6ED1057-1AA01-0BA0 is confirmed for the following Siemens LOGO! controller families:

LOGO! 230 series: The standard 230V AC input/output LOGO! variants — LOGO! 230RC, LOGO! 230RCL, and related standard relay-output models.

LOGO! 24 series: 24V DC variants for standard industrial 24V DC control systems.

LOGO! DM and expansion modules: Some LOGO! digital expansion module variants also support PC programming connection via this cable.

Confirm from the specific LOGO! model's documentation that 6ED1057-1AA01-0BA0 is the correct programming cable — later LOGO! generations (LOGO! 0BA7 and newer) use a different cable interface.

Applications

Building automation controls: LOGO! controllers manage simple building services — lighting control, access control, HVAC damper and fan sequences, and pump control in small commercial buildings. The 6ED1057-1AA01-0BA0 enables programme upload and modification without bringing a specialist service engineer to site — any engineer with a laptop and the cable can connect to the controller.

Small machine controls: Simple machine sequences where a compact, relay-output logic module handles interlocking, timing, and counting without the cost of a full PLC system.

Agricultural and water treatment: Remote installations using LOGO! for pump control, level monitoring, and dosing sequences in water treatment and agricultural irrigation systems.

Sign and display controls: Advertising display sequencing, billboard lighting controllers, and traffic signal timing using LOGO! logic.

Facility management: Energy management, lighting scheduling, and equipment interlock controls in factories, warehouses, and commercial facilities.

FAQ

Q1: Does 6ED1057-1AA01-0BA0 require driver installation?

A driver is included on CD-ROM with the Siemens 6ED1057-1AA01-0BA0. Driver installation creates a virtual COM port that the LOGO!Soft Comfort programming software uses to communicate with the LOGO! controller. Compatible third-party cables for this application may use driver-free FTDI or similar chipsets — check the specific cable's documentation for driver requirements.

Q2: Can 6ED1057-1AA01-0BA0 be used for online monitoring of a running LOGO! programme?

Yes. With the 6ED1057-1AA01-0BA0 connected and LOGO!Soft Comfort running in online test mode, the engineer can observe the live programme execution — seeing the current states of inputs, outputs, timers, and function blocks. This online monitoring is the standard commissioning and troubleshooting method for LOGO! controllers.

Q3: Is 6ED1057-1AA01-0BA0 compatible with LOGO! 0BA8 and newer generation controllers?

The 6ED1057-1AA01-0BA0 is primarily designed for older LOGO! generations (0BA4 through 0BA6 typically). Newer LOGO! 8 (0BA8) controllers use an Ethernet programming connection via the LOGO!Soft Comfort 8 software — the USB cable interface was superseded in the LOGO! 8 generation. Confirm from the specific LOGO! model's ordering data which programming cable or connection method applies.

Q4: What programming software is used with 6ED1057-1AA01-0BA0?

The Siemens LOGO!Soft Comfort software is the standard programming environment for LOGO! controllers. It provides the graphical ladder (FBD/LAD) and function block diagram editors, online communication via the 6ED1057-1AA01-0BA0 cable, simulation mode for offline testing, and programme documentation functions. LOGO!Soft Comfort is available from Siemens' software download portal.